We Make The Impossible, Possible

    Sump Pump Installation

    Water In Your Basement?   Bought A New House and Want to Protect It?

    According to the latest survey, over 60% of American homeowners  have trouble with below-ground wetness that causes issues with  the foundation of the home or small business. The worst effect to  homeowners is  flooded basements which in some cases affects their home management techniques and even more serious their health due to Mold and Mildew growth. Even a little amount of water can cause so much damage to your property that is why it is important that you take immediate action in solving the problem.  Mold Mediation and  Clean up can cost in the thousands.  Modern Process Plumbing has solutions to your Water Issues namely by installing or repairing Sump Pumps.  We offer many options to fit your specific home or business without hurting your wallet.  A typical Sump Pump installation can cost between $600-$1200, which compared to the damages you would have to pay for a wet basement, is a great way to protect your home, business, and most of all your family.

    What Is A Sump Pump?

    Sump Pump is the centerpiece of any Home Drainage system.  It is installed usually in the lowest part of the home most often in basements, crawlspaces, or garages.  Housed mainly in a Sump Pit, the Sump Pump ensures water is pumped away from the Home or Business’s foundation.  Water flows into the Sump Pit through drains or naturally through the soil or foundation.  The Sump Pump is triggered by sensors or floats when the water reaches a certain height, the Sump Pump then pumps the water away from the home through a drainage pipe thus ensuring your basement and home stays dry.  Don’t Forget Some KInd Of Back-Up System in case of Heavy Storm Power Outages. There are several Battery Back-up systems available to help keep your pumps working when you need them the most.

    Different Types Of Sump Pump?

    There are typically 2 Types of Sump Pumps, Submersible and Pedestal Sump Pumps.  There are different types of Submersible Sump Pumps and Modern Process Plumbing can help you decide which one is perfect for your situation and budget.

    Submersible Sump Pumps

    This type of Sump Pump is submerged in a Sump Pump Pit.

    Grinder Sump Pump

    Grinder Sump Pumps are a step up from the regular Sump Pumps and Effluent Sump Pumps as they can pump out solid items normally from Sewer backups along with rain water.  They work the same as Effluent Sump Pumps using floats and sensors to measure levels they then grind up the waste water and eject it through a drainage pipe to a sewer or septic system.  Grinder Pumps are also known as Sewage Pumps and usually cost about twice as much as Effluent type pumps.  Because of the main use of these Pumps proper maintenance is required to esnure these pumps continue working correctly.  Complete New Install can cost anywhere from $1200-$2500 depending on situation.  Just a replacement and Installation on average is around $800-$1400. 

    Details

    • Pumps Water and Solids from Sewage Backups

    • High Quality and High Powered Motors

    • Ball and Pressure Triggers

    • Commercial and Business Applications

    • Can be installed Outside

    • Needs Consistent Maintenance

    • Sewer or Septic Sytem Capable

    • Battery Backup Capable

    • Average Cost $200-$600

    Effluent Sump Pump

    Most Common of all Sump Pumps, these pumps can pump out water to ensure your home or business stays dry.  A new Installation of the Sump Pump plus all the piping and Concrete cutting is around $700-$1500.  Just Replacing an older Sump Pump with a new one costs on average $300-$500.

    Details

    • Made Of Cast Iron, Stainless Steel, Plastic, or a Combination.

    • Float Triggered or Water Pressure Triggered Systems

    • Motor is enclosed and submerged keeping it cooler longer

    • Can develop leaks overtime

    • Quality varies by design

    • Most common is 1/2 HP Motor but more powerful models are available

    • Battery Backup Capable

    • Sump Pump Average Cost $100-$300

    Pedestal Sump Pumps

    This Sump Pump sits above the floor with a Pipe extending into the Sump Pit below.  The motor draws the water out of the Sump Pump Pit and into the Drainage Pipe and away from your home or business. This type of Sump Pump tends to be a lot more noisy since the motor is not submersed but tend to be a lot more economical in price.  The average cost to install a new Pedestal Sump Pump averages around $500-$1000.  A simple Replacement Installation costs around $200-$500.

    Details

    • Lowest priced Sump Pump

    • Quality and Power vary by Model

    • More Noise and Above Floor Space

    • Easy to maintain

    • Low Installation Costs

    • Battery Back-up Capable

    • Costs $50-$200

    What To Expect

    • Inspect your old Sump Pump System
    • If New Installation Check Entire House Drainage System to Determine Correct Placement of New Sump Pump
    • Go Over All Your Options
    • Answer Any Questions You May Have
    • Show You We Are Licensed and Insured
    • Give You 100% Free Estimate
    • Go Over Any Warranties and Guarantees
    • Pull All Necessary Permits
    • Install New Sump Pump
    • Install Any New Piping, Parts, Etc That Are Needed
    • Clean Up Area Including Hauling Away Debris and Old Sump Pump
    • Finish Up
    • Ask For Your Final Approval
    • Do Check Up On Other Plumbing Fixtures In House 
    Modern Process Plumbing Medina, Brunswick, Wadsworth, Cleveland emergency plumbing repair
    modern process plumbing plumber repair medina, wadsworth, westlake, cleveland, brunswick

    Sump Pump Tips

    • Always look for the best Motor for your budget.  The Motor is the heartbeat of the Sump Pump and the best way to get long life out of it is by going with the better motor.

    • Always do proper maintenance on Sump Pump.

    • Ensure you have some sort of Back-up System for your Sump Pump in case of Heavy Storm Power Outages

    • Ask Your Plumber about your Sump Pump needs, Not all Pumps are made equally.

    Contact Us Form

    Don't hesitate and let's get started! Contact us for a free quote today.

    svg

    Our Service Area

    modern process plumbing plumber repair medina, wadsworth, westlake, cleveland, brunswick

    Medina, Westlake, Wadsworth, Cleveland, Lakewood, Brunswick, Strongsville, Rocky River, Parma, Akron, Elyria, Independence, Fairlawn, Beachwood, Chagrin Falls

    24/7 Emergency Service

    Plumbing issuesdon't always happen from 9am-5pm. That is why we are here for you 24 hours a days, 7 days a week.

    Other Services

    Modern Process Plumbing Medina, Brunswick, Wadsworth, Cleveland 24-7-emergency-services

    Emergency Repair

    We understand how an emergency can affect your life and we are here to help you one on one or as a whole team if needed. When you call you will talk one on one with one of our owners , no machines.

    Learn More
    sump pump installation modern process plumbing

    Sump Pump Installation

    According to the latest survey, over 60% of American homeowners have trouble with below-ground wetness that causes issues with the foundation of the home or small business. The worst effect to homeowners ...

    Learn More
    Drain Cleaning & Repair modern process plumbing

    Drain Cleaning & Repair

    Drains are the Most Under Appreciated part of your Home’s or Business’s Plumbing Systems. From the Shower Drain all the way to Your Sewer Line Drains, proper maintenance and observation will ensure...

    Learn More
    water heater installation and repair modern process plumbing

    Water Heater Install & Repair

    Do you have to take quick showers before you run out of Hot Water? Have No Hot Water At All? Modern Process Plumbing is your Hot Water Heater Experts. We dozens of different options to fit your needs...

    Learn More
    residential plumbing Modern Process Plumbing

    Residential Plumbing

    From a leaky toilet to full blown sewer repair, Modern Process Plumbing offers a complete line of Residential Plumbing Services including bathrooms, kitchens, sinks, toilets, drains, and more.

    Learn More
    sewer repair modern process plumbing

    Sewer Repair

    A Clogged or Damaged Sewer Drain can be someone’s Worst Nightmare. A slow drain or Bad Odors are the first signs of a problem with your Sewer Drains. We use the best technology including...

    Learn More
    Frozen Pipe Repair And Prevention modern process plumbing

    Frozen Pipe Repair

    Frozen Pipes left untreated can cause thousands of dollars in damage and can lead to health concerns down the road. As water freezes air gets trapped in tiny bubbles expanding the water into ice.

    Learn More
    toilet repair and installation modern process plumbing

    Toilet Repair & Installation

    Modern Process Plumbing has dozens of different Toilets that fit any style and budget. We are a Full Service Plumber that can fix your current Toilet and ensure it lasts you for years. We can give you advice...

    Learn More
    To Top
    Call Now